raspberry pi

1637 Articles

Fail Of The Week: Subscription EV Charger Becomes Standalone, Briefly

November 1, 2024 by 43 Comments

At this point in the tech dystopia cycle, it’s no surprise that the initial purchase price of a piece of technology is likely not the last payment you’ll make. Almost everything these days needs an ongoing subscription to do whatever you paid for it to do in the first place. It’s ridiculous, especially when all you want to do is charge your electric motorcycle with electricity you already pay for; why in the world would you need a subscription for that?

That was [Maarten]’s question when he picked up a used EVBox wall mount charger, which refused to charge his bike without signing up for a subscription. True, the subscription gave access to all kinds of gee-whiz features, none of which were necessary for the job of topping off the bike’s battery. A teardown revealed a well-built device with separate modules for mains supply and battery charging, plus a communications module with a cellular modem, obviously the bit that’s phoning home and keeping the charger from working without the subscription.

Continue reading “Fail Of The Week: Subscription EV Charger Becomes Standalone, Briefly” →

Pi Pico Lays Down The Groove

October 30, 2024 by 7 Comments

From the 60s to perhaps the mid-00s, the path to musical stardom was essentially straight with very few forks. As a teenager you’d round up a drummer and a few guitar players and start jamming out of a garage, hoping to build to bigger and bigger venues. Few people made it for plenty of reasons, not least of which was because putting together a band like this is expensive. It wasn’t until capable electronic devices became mainstream and accepted in popular culture in the last decade or two that a few different paths for success finally opened up, and this groovebox shows just how much music can be created this way with a few straightforward electronic tools.

The groovebox is based on a Raspberry Pi Pico 2 and includes enough storage for 16 tracks with a sequencer for each track, along with a set of 16 scenes. Audio plays through PCM5102A DAC module, with a 160×128 TFT display and a touch-sensitive pad for user inputs. It’s not just a device for looping stored audio, though. There’s also a drum machine built in which can record and loop beats with varying sounds and pitches, as well as a sample slicer and a pattern generator and also as the ability to copy and paste clips.

There are a few limitations to using a device this small though. Because of memory size it outputs a 22 kHz mono signal, and its on-board storage is not particularly large either, but it does have an SD card slot for expansion. But it’s hard to beat the bang-for-the-buck qualities of a device like this, regardless, not to mention the portability. Especially when compared with the cost of multiple guitars, a drum set and a bunch of other analog equipment, it’s easy to see how musicians wielding these instruments have risen in popularity recently. This 12-button MIDI instrument could expand one’s digital musical capabilities even further.

Continue reading “Pi Pico Lays Down The Groove” →

Compact Dedicated News Reader Always Brings You CBC

October 29, 2024 by 4 Comments

Your phone or laptop will give you access to the vast majority of news in the world, in languages you can read and a few hundred you can’t. Maybe you only like one news source, though, and that news source happens to be Canadian Broadcasting Corporation (CBC). If that’s the case, you might like to give this project a look from [Ron Grimes].

[Ron] built a device that does one thing and one thing only: it displays news stories from CBC. It’s built around a Raspberry Pi 2, and the project began when he wanted to interface a keypad just to see if he could. With that done, the next challenge was to integrate a 16×2 character LCD display of the HD44780 persuasion. With those two tasks completed, the question was simple — what to display? He figured tuning into the CBC news feed would be useful, and the Chocolate Box News Reader was born.

The device displays 29 news feeds in total, including the main top stories, world news, and Canadian regional news. It stores 15 news items per feed and will hang on to those stories even if the Internet drops. The reader will display the whole stash of stored news in around 90 minutes or so, and each stored item comes with more information if something strike’s [Ron’s] curiosity or interest. Files are on GitHub for the curious.

It’s a neat build, and we can imagine it being a smart item to have kicking around the house. It was also a great way for [Ron] to build on his familiarity with the Raspberry Pi, too. Meanwhile, if you’ve got your own nifty Pi-based projects—or others!—don’t hesitate to drop us a line!

The Woodworker’s Cyberdeck

October 28, 2024 by 9 Comments

Computers were supposed to be personal, customizable, and cool. At times, in this cold modern world, we forget that. However, the cyberdeck scene is chock full of people building creative, original computers that suit their own tastes, aesthetics, and needs. [DIY Tinkerer] is one such individual, and he made the most of his woodworking skills when it came time to build his own cyberdeck!

The technological basics are along the lines of what we’re used to in this field. The build is based around a Raspberry Pi 4, with [DIY Tinkerer] selecting an 8 GB model for his needs. It’s paired with a 9000 mAh onboard battery, and there’s a power jack on the front to let the thing run on anything from 5 to 20 volts DC. For ease of use, there’s a multi-memory card reader and several USB 3 ports available.

The rest of the video focuses on the woodworking side of things. [DIY Tinkerer] shows us how he managed to build a new housing out of a rugged plastic case that would also be practical to use. The final product is both functional and attractive, and comes with an oscilloscope built in to boot! It came a long way from his earlier build, too.

We’ve seen a great load of cyberdeck builds over the years.

Continue reading “The Woodworker’s Cyberdeck” →

Word Of The Day Calendar Is Great Use Of E-Paper

October 28, 2024 by 10 Comments

If you’re trying to learn a new language, there are always a lot of words to learn. A word-of-the-day calendar can help, and they’re often readily available off the shelf. Or, you can grab some hardware and build your own, as [daedal-tech] did!

The project was built as a gift to help [daedal-tech]’s partner with their efforts to pick up French. Thus, a Raspberry Pi Zero 2W was employed and paired with a small Waveshare e-Paper display. These were stuffed inside a fancy light switch plate from Hobby Lobby and a small stand, the pair of which act as a pretty nice little frame for the build. The Pi runs a small Python script which employs the BeautifulSoup4 library and the Python Image library. Basically, the script grabs French words and spits them out on the display with a small description such that one might understand their meaning.

It’s a simple build, but one that has some real utility and is fun to boot. We might see more word clocks than calendars around these parts, but we love both all the same!

Open-Source, 3D Printed Trackpad

October 21, 2024 by 22 Comments

Touchpads, or trackpads, have been around since the 1980s. Today, you can often find them in laptops and notebook computers as pointing devices. With no moving parts, a trackpad are easy to integrate into the body of a portable computer.  they’re much smaller than the traditional mouse. Until the advent of multitouch and gestures over the past two decades, though, they were generally poor substitutes for an actual mouse. These days, trackpads have enough features that some users prefer them even on their desktop computers. If you’re that type of person and don’t want to shell out a big pile of money for an Apple, Logitech, or other off-the-shelf trackpad you can always build your own.

Continue reading “Open-Source, 3D Printed Trackpad” →

Building A Sound Camera For Under $400

October 10, 2024 by 20 Comments

[Benn Jordan] had an idea. He’d heard of motion amplification technology, where cameras are used to capture tiny vibrations in machinery and then visually amplify it for engineering analysis. This is typically the preserve of high-end industrial equipment, but [Benn] wondered if it really had to be this way. Armed with a modern 4K smartphone camera and the right analysis techniques, could he visually capture sound?

The video first explores commercially available “acoustic cameras” which are primarily sold business-to-business at incredibly high prices. However, [Benn] suspected he could build something similar on the cheap. He started out with a 16-channel microphone that streams over USB for just $275, sourced from MiniDSP, and paired it  with a Raspberry Pi 5 running the acoular framework for acoustic beamforming. Acoular analyses multichannel audio and visualizes them so you can locate sound sources. He added a 1080p camera, and soon enough, was able to overlay sound location data over the video stream. He was able to locate a hawk in a tree using this technique, which was pretty cool, and the total rig came in somewhere under $400.

The rest of the video covers other sound-camera techniques—vibration detection, the aforementioned motion amplification, and some neat biometric techniques. It turns out your webcam can probably detect your heart rate, for example.

It’s a great video that illuminates just what you can achieve with modern sound and video capture. Think SIGGRAPH-level stuff, but in a form you can digest over your lunchbreak. Video after the break.

Continue reading “Building A Sound Camera For Under $400” →