Keyboards! They’ve been almost universally made out of plastic since the dawn of the microcomputer era. Meanwhile, wood is a rather desirable material and it lends itself rather well to touch-heavy human interface devices. As [ProcessX] shows us, though, it can take quite a bit of work to fabricate a keyboard entirely out of this material.
The video shows us the construction of a Japanese wooden keyboard from Hacoa, which retails for around $1000 USD. The video shows us how the wooden housing is produced from start to finish, beginning with the selection of some fine walnut. From there, we get to see how the frame is routed out and machined, along with the more delicate work to create all the keycaps out of wood, too. They’re laser engraved to give them high-quality markings that will last the test of time. What we don’t see is the construction of the electronics—it appears that’s handled separately, and the wooden frame and keycaps are then assembled around the otherwise complete existing keyboard.
It’s nice to see what it takes to produce commercial-quality parts like this out of wood. We’ve seen other wooden keyboard builds before, too.
[Thanks to John for the tip!]
adding to my future project list.
It looks very nice when it’s new. How clean does it look after two years of usage, especially the laser engravings?
Depends on. If you are Japanese, you are certainly no stranger to hygiene and white gloves.
I would like to think they are so genteel that they have lambskin typing gloves, but I think they go bare-handed like the rest of us :D
There are cases they are being very formal, though.
Train station personnel or police officers, for example. They’re dressed very well.
https://www.youtube.com/watch?v=o9Xg7ui5mLA
The average train hobo from the era when those uniforms were designed was better-dressed than people who now make >1m in salary in San Francisco. It’s nice to see them still in use somewhere.
I under that the Japanese take pride in their woodworking, like many of their trades each has their own jargon not taught in regular schools, but a person with moderate woodworking skills and a laser engraver could build a case and keycaps for less than $1K USD.
If this is a negative comment, so be it. My laser engraver (usedl) cost $50, bandsaw (used) $180, shellac -free at the county recycling center. But I will admit making wooden CapsLock, and NumLock LEDs is above my pay grade!
B^)
Sometimes I think that we Germans used to have a similar mindset to the Japanese when it came to quality.
Companies like Bosch valued quality, trust and a good reputation rather than quick money.
Then our companies became more and more American, more and more international. Now “made in Germany” no longer has any meaning.
I really hope the Japanese do better than us and learn from our mistakes.
I do not think that the problem is that German companies became “american” they became the property of no one, thus no one takes pride in quality. The only pride the ceos take is in earning money to the share holders, if for that they have to sell it in pieces so be it. I work for a japanese company but the branch I am in is kind of autonomous, and here in DE. In my opinion, interested in quick bucks instead of good products, at least what I get from “all hands” meetings. I think quality is something like FuSa, if it is not backed in from the start then it is not there. But somethings filtered through, it is clear to me that quality (like FuSa) is something everyone contributes to :)
Sigh. 😮💨
FuSa = Functional Safety
Well, at least there is that!
Ale, I hope you find fulfillment in your job.
Or that the money you earn there makes you happy.
And that you can look back on it later with pride and a smile on your face.
After all, it is a part of your life that you spend every day at work.
Bosch went from being top-grade to absolute trash when it was shipped to Brazil. I still have West Germany-made Bosch spare parts lying around for my BMW motorcycle, and they are indestructible. I’ve never known that type of headlight bulb to burn out even once for instance, and the rectifier board is incredibly robust. Got a newly-manufactured coil, case was cracked and it let in moisture and failed within weeks. Got another and it was the same. Ordered a knock-off from China.
Yeah, you can do it for yourself cheaper than that, as it rarely makes sense to put a price on hobby time. But I don’t think you could profitably sell these for less than $1k USD, at least not without cutting corners from the manual finishing and quality control time.
It is a luxury product. The price is to keep cheap people away.
Thankfully. 🙏 Personally, I’m exhaused by all the little people’s money talk. 😮💨
People who order these products do buy them silently, do appreciate them and do not constantly whine about money.
They are not the usual consumers who want a mass-produced product that they can wearout without spending a second thought.
Typical consumers are free to go to McMickeys, Wallmarket or Toys B Us and buy their favorite plastic keyboards. 🙂
s/cheap/poor
I’m not sure.
It might be that one sees a value in an item that is solely by its function overpriced. Aesthetic, origin, maker, material, whatever. Might be the same with hand made shoes. Or handmade clothing. Things not made in quantities but with “love”.
Like my baker around the corner making this bread I would die for. Costs more than that in another bakery, and a lot more than in a supermarket. I know the baker loves his job and does it with special care. So sometimes I buy it and celebrate it. More often than I should.
It might be a fine line between a right priced valuable item and an overpriced trendy rich people can buy anything show-off item.
I think I’d like this more than an $800 smartphone or $1200 peloton. I know people who have spend well over $1k on their ultralight camping gear. But I live in the Bay Area, it’s full of people with about 10x more money than sense.
Not really negative, that’s a good way to do it. But from what I’ve seen from these Japanese craftsmen (there’s a shoemaker who just won a global contest and his videos are divine) the last thing this is about is thrift. It’s luxury
Would love to know who the shoemaker is enjoy watching videos like that while working on my own projects.
I am doing a woodworking (fine cabinetry) course. I showed one of my pieces on social media. A distant friend asked “can you make one like that for me?” to which I responded “€4000”. “What? €4000 for a few planks?”… Yeah, there’s about €250 of materials in it, and a full 23 days of work. With minimum wage, that comes to €4000, and then I don’t pay for workshop time.
Off course, I was still learning at the time and could now do the same in way less time, but I don’t own a workshop so I still have to pay for that.
In the meanwhile, a similar-looking thing is available online for about €35.
I had similar conversations about my leather work. Oh could you make me a bag? £1000. Think I could get them down to maybe £700 if I treated it more as a business and set myself up for it but then it is just a hobby. Besides if I like you enough and know you long enough you will probably get something for free eventually.
Has anyone ever made an all-wood (or bamboo, or similar material) manual typewriter? Any woodworkers out there willing to stand up and say “Challenge accepted!”?
Not me!
B^)
I’d love to see that but the first thing you’d have to do is figure out the kinds of stresses the different parts of the typewriter would experience and choose your wood accordingly.
Is wood even the right material? I think I’d like cast aluminum bronze on an old school typewriter.
Computer cabinets in the 1970s and before had been made of wood.
It’s a traditional material, so to say. But I haven’t seen a typewriter made of wood so far, to be fair.
Can anyone identify the base keyboard they’re skinning – well, shelling – here? The keyswitches are GTMX, and the board looks off the shelf: wonder what it is
i searched around but wasn’t able to find anything with the 3 led under top right button like in the video. I don’t think the base keyb is anything special, you could get a better performing programmable wireless pcb such as the ymdk 96.
Looks like a MIIIW K10.
I find it interesting that the original plastic parts are not replaced but overlaid.
Good point. The company seems to specialize in keycaps, I assume?
A full wooden, mechanical keyboard would of course be preferable.
But then the company would probably have to agree on a specific model.
Something like the IBM Model M or the NEC PC-98 counterpart perhaps.
Another reason could be that Japanese customers may prefer sleek and aesthetically pleasing designs.
Using mostly balsa wood would make the construction very brittle or delicate.
The little cross thingie that inserts into the keyswitch would be pretty brittle if it had wood grain running through it
Yeah, it almost looks like a Keychron low profile goes into it.
I kinda hoped to see how they milled the stems for the keycaps, but I guess overlaying wood on the plastic works, and is probably more durable!
God damn that’s gorgeous!
need some rich Corinthian leather trim
You welcome – a John 😄
That is really super nice I took woodworking when I was in middle school and we had a really nice wood shop. I also did a lot of cutting of wood because we made maple syrup where I was going to school. I was in charge of that particular project. I really love working with wood and out of both desire and necessity I’m going to start trying a little bit of metal. But it would be so cool to see like a keyboard and a whole tower made like that or even a laptop have the case replaced with a really nice wooden finish. Nice craftsmanship by the way !